MAX14589E High-Density, ±5V Capable DPDT Analog Switches
Product Details
he MAX14589E/MAX14594E high-density, double-pole/double-throw (DPDT) analog switches feature Beyond-the-Rails™ signal capability that allows signals from -5.5V to +5.5V to pass without distortion even when the power supply is below the signal range. The low RON resistance (0.2Ω) makes the devices ideal for low-distortion switching, such as audio.
The MAX14594E has internal shunt switches that discharge the audio amplifier AC-coupling capacitance at the normally open (NO1 and NO2) terminals. This feature reduces click-and-pop sounds that occur when switching audio signals between precharged points.
The switches are fully specified to operate from a single +1.6V to +5.5V power supply. Because of the low supply current requirement, VCCEN can be provided by a GPIO. When the power is not applied, switches go to a high-impedance mode and all analog signal ports can withstand signals within the analog signal range. The devices control the switches with a control bit, CB.
The MAX14589E/MAX14594E are available in a 1.2mm × 1.2mm, 0.4mm pitch, 9-bump wafer-level package (WLP) and operate over the -40°C to +85°C extended temperature range.
Applications
- Portable Audio/Video Equipment
- Portable Navigation Devices
- Smartphones
- Tablets
Features and Benefits
- Distortion-Free Beyond-the-Rails Signaling
- Negative Audio and Video Signal Capable
- -5.5V to +5.5V Analog Signal Range Independent from VCCEN
- On-Resistance 0.2Ω (typ)
- +1.6V to +5.5V Single-Supply Range
- Click-and-Pop Suppression
- Smooth Switch Transition
- Break-Before-Make Operation
- Low Supply Current 30µA (typ) at 1.6V
- Can Be Powered by a GPIO
- High-Impedance Mode When VCCEN Not Applied
- ESD Protection on COM_
- ±15kV Human Body Model
- ±10kV IEC 61000-4-2 Air Gap
- ±8kV IEC 61000-4-2 Contact
- ESD Protection on NC_ and NO_
- ±15kV Human Body Model
- Small Board Space
- 9-Bump WLP (1.2mm x 1.2mm)
- -40°C to +85°C Operating Temperature Range